Riger DB102 Settings

First thing first!!!
Please check your modem IP is it under 192.168.x.x or 169.x.x.x. How to do check?
Go to Run or use (Windows Logo + R), then key in cmd. Then type ipconfig. Try to find you IP address. If your IP is 169.x.x.x, kindly change your Network Card IP manually to

Go to

Username: tmadmin
Password: tmadmin

Then you will see this above page. Go and click at the WAN Tab and click at PPP.

Set the new interface as:

PPP interface = 0
ATM VC = aal5-0
Protocol = PPoE
Use DNS = enable
Security = PAP

Don\’t forget to set your username as username@streamyx and also your TMNet Streamyx password. When done, click Submit.

Click on ATM VC and make sure interface are set as:

aal5-0 VPI = 0
VCI = 35
Max proto = 2

After that, click on Admin and then Commit and then Reboot Once it\’s done you should check your Internet connectivity by loading your favorite website.

If you’re unable to go to, please make sure that your PC IP is in the range of 192.168.x.x.

Done! Riger DB102 is a good modem.

Leave a Reply

Be the First to Comment!