Triz Modem

Advertisement

First thing first!!!
Please check your modem IP is it under 192.168.x.x or 169.x.x.x. How to do check?
Go to Run or use (Windows Logo + R), then key in cmd. Then type ipconfig. Try to find you IP address. If your IP is 169.x.x.x, kindly change your Network Card IP manually to 192.168.1.2.

How To Configure Triz Modem

  1. Set PC IP to 192.168.1.2 and Gateway to 192.168.1.1
  2. Click on Internet Explorer and at address bar point to 192.168.1.1. Click Go
  3. When Login Interface pops up, enter as below:
    • LOGIN NAME: admin
    • PASSWORD: telekomst / aaaaaaaa
  4. To set Triz modem to PPPOE, click on WAN at the left side of the frame
  5. Use the default Adapter Pvc0 and Click on Submit
  6. Then you will see WAN Configuration Windows, please follow up this instruction and fill in the form.
    • Bridged: Enable
    • Encapsulation: PPOE LLC
    • Enter your TMNet Streamyx login
      • Username: username@streamyx
      • Password: your TMNet Streamyx password
  7. VCI: 35
  8. VPI: 0
  9. Make sure Automatic Reconnect is tick
  10. Click on Save Setting and Reboot on the Left Frame
  11. Click on the Save and Reboot button (This will write all the settings to the flash memory in the modem)

So that’s all.